Free Shipping!
Seals and protects stamped concrete, decorative concrete, brick, stone and other masonry surfaces from damage and color loss while enhancing the similar to a “wet look”.
MasonrySaver® Decorative Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. Can be applied over both water based and solvent based sealers that have been used previously without having any adhesion issues.
Designed for use on both interior and exterior concrete, MasonrySaver® Decorative Concrete Sealer is suitable for use on a variety of surfaces where a durable gloss finish is desired including concrete patios, driveways, sidewalks and even garage floors.
Product Uses:
- Stamped Concrete
- Decorative Concrete Surfaces
- Brick Pavers
- Acid Stained Patios
- Garage Floors
- Basement Floors
Benefits:
- Can be applied over previously treated surfaces with solvent-base sealer
- Water-based formula for easy application and rapid dry time
- Provides an attractive, gloss finish to masonry and concrete surfaces
- Protects masonry and concrete surfaces from color fade
- Seals concrete surfaces making them washable and easy to maintain
- Non-yellowing, clear finish
- Durable concrete protection with “hot tire” resistance
LIMITATIONS: Not suitable for use over asphalt surfaces. This product is designed for use on horizontal or vertical surfaces. Do not use on below-grade surfaces that are subject to severe hydro-static pressures. When using in areas subjected to hot tire traffic, allow adequate time for product to cure before putting the area back into surface. When applying over previous coating, hot tire resistance maybe compromised. Do not use if the area will be exposed to softer, high performance tires. Will not “fix” old sealers or coatings that have blushed or turned milky white.
Is this appropriate for an exposed aggregate pool deck? I plan on mixing in an additive to make it non-slip.
Yes but you cannot mix an additive into this product.
Thank you for your response. I am concerned about the high gloss being slippery and wanted to mix Sharkgrip into it. Will it make the surface slippery without an additive? If so, is there anything else I can do (I don’t understand why I can’t mix a non-slip additive into it). Thanks again.
This product is not thick enough to suspend a grip additive.
Coverage Per Gallon:
Approx. 100-150 sq. ft. per gallon. 5 Gallons would cover 500-750 sq. feet.
How many square feet for 5 gals of Masonry saver Decorative concrete sealer
No it will not work with this. Sorry but nothing will nor will you probably need one.
Will Super Grip work with this product?
If not what do you suggest?